ETAS
ES411.1 - User Guide
52
6.4
Applications
6.4.1
General
The modules ES4xx/ES63x/ES93x can be used for the following applications,
individually or as part of a daisy chain module chain:
• Measuring and calibrating with INCA
• Rapid Prototyping with INTECRIO (with ES910.3 Prototyping Module or
with RTPRO-PC).
Additional ECU and bus interface modules as well as measuring modules are
networked with each other via Ethernet and connected with the daisy chain
module chain.
The measuring setup can be supplemented with a drive recorder to record all of
the data acquired by the connected modules. The drive recorder ES720.1 sup
-
ports the simultaneous recording of different measurements (multi-recording).
The data are stored in the ASAM standard format MDF (Measure Data Format).
They can be conveniently evaluated using the Measure Data Analyzer MDA
from ETAS and easily be compared with INCA reference measurements. The
drive recorder ES720.1 can automatically transfer the recorded measure data
encrypted and compressed via LAN, WLAN or wireless radio to customer-spe
-
cific data servers.
6.4.2
ES411.1 with additional ETAS Modules (MC Application)
Fig. 6
-
14
ES411.1 with additional ETAS Modules for MC Applications
The ETAS Daisy Chain concept enables a simple network architecture since
only the ES411.1 or the first module of the module chain is connected with the
PC or with the "ETH" port of the ES59x.1.
Additional bus analysis functions on the CAN, LIN and FlexRay buses as well as
(X)ETK bypass applications with measuring and calibrating can be made
accessible with ES59x modules.
Drive Recor
der
ES720
Interface Module
ES59x
Multi I/O-Module
ES930
ECU
ETK
CAN, LIN,
FlexRay
Lambda
Lambda Module
ES63x
16
Inputs
14
Outputs
6
Halfbridges
Voltage,
Tem peratur
e,
Lambda,
Counter,
1 Type per Module
Micro Measurement Modules
ES4xx
Experimental
Environment
INCA + EIP
Vehicle, Test Bench, Motor
, ...
MC:
Latency Output
app. 300 ms
