ETAS
Getting Started
ES411.1 - User Guide
40
To connect the modules:
1. Insert the Allen key into a hexagon socket on the right-hand
side of the right-hand module.
Fig. 6
-
6
Connected ES400 Modules
2. Screw the two modules by turning the Allen key clockwise as
far as it will go within the module.
Both modules are now connected mechanically on one side.
3. Insert the Allen key into the other hexagon socket of the right-
hand module.
4. Screw the two modules by turning the Allen key clockwise as
far as it will go within the module.
Both modules are now completely connected mechanically.
Connecting to Other Modules
To connect the ES400 module to other modules, you require a 2 mm Allen key
(minimum length 20 mm).
To connect to other modules:
1. Assemble other modules in accordance with the procedure
described in the section 6.2.2 on page 39
NOTE
Screw the two modules together without getting them off-
thread!
NOTE
Screw the two modules together without getting them off-
thread!
NOTE
You can only successively screw additional modules, but not module blocks,
onto the right-hand side of this module.
