ETAS ES1336.1, User Manual

Page: 20 / 30

Pin Assignment and Display Elements 20
3.2 “DIAG 0-7” Connector
Up to 8 FPGA signals can be led through to the “DIAG 0-7” connector for
diagnostic purposes.
The connector is a Lemo EXB.1B.310.HLN (female) connector.
Fig. 3-2 shows the pin assignment (view from the plug-in side).
Fig. 3-2
“DIAG 0-7” Connector
The pin assignment is as follows:
Tab. 3-2 “DIAG 0-7” Pin Assignment
Pin Signal Pin Signal
1 GND 7 Out 5
2 Out 0 8 GND
3 Out 1 9 Out 6
4 Out 2 10 Out 7
5 Out 3 Housing Protective earth
6 Out 4
1
2 3
4
10
5
6 7
8
9