21
Folding up:
Move the ”plastic casing” (A) down-
wards. Then lift the anti-tip upwards
in a perpendicular position until a
clear ”click” is heard.
Folding down:
Press the anti-tip downwards so a
clear ”click” is heard.
Telescopic anti-tips can also be
adjusted length-wise by pressing in the
snap-lock.
Ensure that the ant-tip is in
locked position.
-
Mount the holder on the back
of the tilter using the screw (A)
and nut (B) supplied.
-
Thread the elastic strap
”double” around the cane to
make a loop.
The ferrule of the cane might
have to be removed to allow the
elastic band to be attached.
-
Place the cane in the holder
and stretch the elastic loop over
the push handle.
Tools: 4 mm Allen key and
10 mm spanner.
The calf strap is in two parts and can
be separated when the legrests are
swung out to the sides. The length
can be adjusted. It can be mounted at
any height with self-adhesive Velcro
around the legrests. Assembly instruc-
tions are supplied with the calf strap.
(!)
Adjust the length so that the
foot is placed in the centre of the
footrest and does not come into
contact with the castor wheels:
Separate the calf strap (and flip
up the footrests) before
transferring the user into/out
of the wheelchair from the front.
12 Assembly instructions accessories
A
”click”
A
B
12:5 Calf strap
12:6 Cane holder, mounting
12:7 User brake
Release the air from the rear wheel.
Undo the screw on the armrest attach-
ment (A).
Fit the brake handle’s axle in the side
frame (B). Secure with a retaining
ring. Use screw (A) to fix the plate
(C) against the armrest attachment.
Reinflate the rear wheel.
12:8 Anti-tip
A
B
C
3-7 cm
