Etac Cross 5 Active Manual Download Page 44

Page: 44 / 48

Etac / Cross 5 / www.etac.com

“Click”

9. Accessories - adjusting, handling

Head support

Cross 5

Cross 5 XL

The head support is mounted onto the bow handle
(accessory) or onto a separate head support attach-
ment. The head support is adjustable in height, depth and
angle, and is detachable.

Before the head support is adjusted, ensure that

the user has a good, secure sitting posture.

Check the balance of the wheelchair when the

user leans against the head support.

We recommend the use of anti-tips.

Head support attachment

Cross brace

The cross bar is used when the back chassis needs to
be reinforced.

Do not lift the wheelchair by the cross bar.

The head support attachment is used to fit the head
support.

Do not use the head support attachment to lift

the wheelchair.

Summary of Contents for Cross 5 Active

















































Search results

Summary of Contents for Cross 5 Active

Reviews:

Related manuals for Cross 5 Active

Brands by name

Popular brands

Etac Cross 5 Active, Manual

Search results

Summary of Contents for Cross 5 Active

Reviews:

Related manuals for Cross 5 Active

Brands by name

Popular brands