Etac Crissy Active, Manual

Page: 23 / 48

3
23
Etac / Crissy / www.etac.com
A
B
A
Push handle/push brace, height-adjustable
Loosen knob (A). Press in the red wedge and set the
desired height. Ensure that the push handle is in a “snap
lock” position, and tighten the knob.
Make sure knobs are securely tightened. This is
especially important if the chair is to be lifted
with the user sitting in it.
Ensure that the push handle’s button lock has
popped out below the push handle attachment.
The push brace must be removed before the
chair can be folded.
User manual
Attendant brake (motion brake)
• Brake while in motion by pulling the brake lever
upwards.
Attendant brake (parking brake)
• Activate the parking brake by pulling the brake lever
upwards and pressing in button A.
• Release by pulling the lever upwards.
Leg support (Etac Crissy Swing-Away)
The leg supports can be lifted/swung to the side as
needed. lockable leg supports by pressing the red button
(A).
To attach the lockable leg supports, press down on the
red button (A), put the leg support into place and release
the button. The leg support is now locked (B).
Check that the leg supports have locked before
lifting.