eta MIA 2260, User Manual, Page: 28 / 64

28
GB
/ 59
– Do not use the delumper with the charging cord plugged in!
– If you’re charging the accumulator for the first time after being
stored away for some time, the accumulator will charge to about
60 % of total capacity. After discharging and recharging again, the
accumulator will charge to 100 %.
– After using the appliance for a long time or in hot environment, the
accumulator may be too hot for charging. Let the accumulator cool
off before charging.
– To extend the lifespan of the accumulator, we recommend
discharging the accumulator completely 4x a year by normal use
and then charging it fully again.
Using the delumper
1) Remove the protective cover A5 .
2) Turn the switch A1 to turn the appliance on (the operation is
indicated by the “green” indicator A7 ).
3) Put the razor strip on the surface of the fabric, removing the lumps
with light movements without pushing hard.
4) Turn the appliance off after use and replace the protective cover.
5 ) Let the appliance recharge as soon as its performance is weaker.
Note : Do not use the appliance on silk stockings, they would get
damaged.
IV. MAINTENANCE
Turn off and unplug the appliance from the el. outlet before
maintenance. Unscrew the lump bin A4 and the protective razor strip
A3 in the direction displayed in picture 3. Clean the bin, protective
razor strip and inner cover with the cleaning brush A7 . Replace all
the parts reversely and assemble the appliance. Make sure all the
bearing areas are functional. Handle the inner razors carefully to
avoid injuries. Do not press the outer foil of the protective razor A3