eta Galanto, Instructions For Use Manual, Page: 19 / 52

19
G B
III. PREPARING THE VACUUM CLEANER
Hose
- Connect the hose B2 to the vacuum cleaner by inserting the end piece to the suction
vent A1 to the maximum position (Fig. 4). You will hear a clicking sound.
- Disconnect the hose by pressing the button on the end piece and pull the hose out
slightly.
Telescopic tube
- You can connect the tube B3 with the hose handle B2 by slight pushing the handle to
the tube (Fig. 3).
- You can disconnect the tube by slight pulling the handle out of the tube.
- The telescopic tube allows setting the suitable length according to your figure. Press the
lock pin in the direction of the arrow and pull out or push in the required length of the
tube (Fig. 5). When you release the lock pin, the tube length is fixed. In pulling out, keep
the tube in the safe distance from your face as the tube is very long.
Floor nozzle
- Connect and disconnect the accessories ( B1 ) in the same way as the tube (Fig. 2).
Crevice nozzle, brush
- Connect and disconnect the accessories ( B6 , B5 ) in the same way as the tube (Fig. 3).
You can connect the appliance directly to the hose handle or to the telescopic tube.
IV. USING THE VACUUM CLEANER
Remove all the packing material, take out vacuum cleaner and the accessories. Pull out
the necessary length of the power cord
A6 and plug the power cord into a socket.
Assemble the vacuum cleaner accessories B1 , B2 , B3 (Fig. 2, 3, 4). If the cleaner is fitted
with telescopic tube B3 , adjust its length to fit your figure (Fig. 5). The floor nozzle B1 is
designed to be used to clean carpets or smooth flooring (Fig. 6). If the floor nozzle is fitted
with the brush, pull it out by switching the flap when vacuuming hard floorings. You can
use the crevice nozzle
B6 for vacuuming places that are hard to access (Fig. 7). Using
brush B5 you can vacuum various kinds of furniture (Fig. 8). The vacuum cleaner can be
switched on or off by pushing the button A3 marked with the symbol " I I " (Fig. 9). The
suction power can be adjusted with the control of the suction hole on the hose handle B2
(Fig. 10) or by setting the pull control A14 (Fig. 9 ). The minimum suction power is
recommended for fine fabrics (e.g. curtains, drapes). The maximum suction power is
recommended for floor coverings (e.g. heavy-duty carpets). After finishing work, switch off
the vacuum cleaner and unplug it from the power supply. By pushing the button
A4 with
the symbol " " (Fig. 9), the power cord will be wound automatically. The vacuum
cleaner can be held and carried by handle
A5 .
Full dust filter signaling
If the coloured field is displayed permanently on the indicator A10 (Fig. 11) while the floor
nozzle is lifted above the cleaned surface at the maximum suction power , the dust filter
must be replaced. Disregard changes on the indicator during vacuuming.
0474_CZ,SK,GB,H,RU,LT_6:gate 16.6.2010 15:04 Stránka 19