20
GB
2 Coffee temperature light
3 Steam temperature light
4 Dispenser filler light
5 On/off button
6 Coffee brewing button
7 Steam button
8 Dispenser filler device button
SET UP
- Remove the water tank (
H
) from the opening on the machine, fill with fresh natural
water up to the Max mark (1.5 lt.), and refit it into its housing onto the body. In order to
guarantee the correct operation of the appliance, push the tank down as far as it will go,
Fig. 5
. The tank may also be filled from the top, by pouring water through the opening
and after lifting the filler cap (
I
),
Fig. 4
.
- Plug the appliance into the mains.
- Press the main switch (
5
)
Fig. 2
; the power light (
1
) will light up and light (
2
) will start
blinking until the operating temperature has been reached. Lower the water/steam lever
(
Fig. 3 - F
), and, at the same time, press the coffee brewing button (
6
) thus bleeding any
air or water out of the circuit. Fill up at least a cupful of water. Lift the water/steam lever
(
F
) back up and stop the brewing cycle by pressing the coffee button (
6
).
IMPORTANT!:
it is recommended that this operation be carried out every time the
machine is started after a few days it has not been used.
For the daily refilling of the water tank, lift the filler flap (
I
) and pour in fresh natural water
through the opening (
Fig.
4
).
- Introduce the coffee into the coffee beans tank (
D
) Max 230 gr.
Fig. 6
. Coffee may be
ground coarse or fine, as per your personal preferences. To change the grinding level,
press the stop button (
B
) and turn the coffee grinder clock or anticlockwise, following the
graded scale,
Fig. 7
.
THIS OPERATION MUST ONLY BE PERFORMED WITH THE
GRINDER OFF.
CHOICE OF THE GROUND COFFEE SUPPLY DEVICE
The appliance is provided with two interchangeable devices:
1) “Continuous flow” device (
M
)
Fig. 1
for the coffee instantaneous grinding.
Press the push button (
M/a
) situated under the ground coffee outlet with the filter ring
inserted into the provided fork
Fig. 8
.
2) “Dispenser/Measuring Device” (
N
)
Fig. 9
. Keep the switch (
8
)
Fig. 2
pressed until the
ground coffee Dispenser is full: operate the Measuring Device lever once or twice,
according to how many cups of coffee you wish to prepare, and keep the filter ring
inserted into the fork. To release, pull the devices (
M
) or (
N
) in your direction.
ETA IM ETA 7175- Cafe Roma Delux20 20
ETA IM ETA 7175- Cafe Roma Delux20 20
23.12.2008 18:55:31
23.12.2008 18:55:31
