eta 815390000, User Manual

Page: 20 / 44

– The power cord must not be damaged with sharp or hot objects, open fire, it must not
be sunk into water or bent over sharp edges.
– If you need to use an extension cord, it has to be uncorrupted and it has to comply with
the valid standards.
II. DESCRIPTION OF THE APPLIANCE
A – electric kettle
A1 – water gauge A4 – tea strainer
A2 – handle A5 – signal lights
A3 – lid
B – control panel *
B1 – ON/OFF switch;100°C/KEEP WARM
B2 – temperature setting button
B3 – signal lights indicating the selected temperature / KEEP WARM function
C – removable stand
C1 – central connector
C2 – supply cord
* The control electronics ensures the appliance turns off automatically after the set
temperature or boil of water has been reached.
III. INSTRUCTIONS FOR USE
Remove all the packing material and take out the electric kettle with the stand. Remove all
possible adhesion foils, stick-on labels or paper from the appliance. Before the first use, fill
the electric kettle with clean water to the maximum level, turn it on and let the water boil.
Then pour out the water and repeat the procedure several times (at least five times).
APPLICATIONS
Unwind the necessary length of the power cord C2 from the storage space of the stand C .
Place the stand on a suitable surface, in the height of about 85 cm, out of reach of children
and incapacitated persons and plug the fork of the power cord to the electric socket (you will
hear a signal sound and signal light indicators will flash).
Grasp the handle A2 of the kettle, remove the lid A3 by sliding it out and fill the kettle with
fresh drinking water. Minimum and maximum water level is indicated by the watermark A1 .
Snap the lid A3 back onto its place and position the kettle filled with water onto the removable
base C (you will hear a signal sound and the signal light indicators A5 will flash).
A) Water heating to 100°C
Press the button B1 to automatically switch on the kettle to a temperature of 100 °C; the
background colouring of the signal lights A5 will come on. By pressing the button B1
repeatedly, the kettle will switch off.
As soon as the required temperature is reached, the kettle will switch off.
B) Water heating to a temperature of 50 - 90°C
Press the button B2 repeatedly to set the required temperature from the following options:
50-70-80-90°C; the selected temperature is indicated by the appropriate signal light indicator
B3 .
GB
20 / 37