eta 339390001, Instructions For Use Manual

Page: 92 / 148

EN - 92
EN
Open
Step 1: Turn the filter in anti-clockwise direction
Step 2: lift the filter assy up
NOTE
When following this procedure from step1 to step 2, the filter system will be removed; when
following it from Step 2 to Step 1, the filter system will be installed.
REMARKS:
-
Inspect the filters for blocking after every time the dishwasher has been used.
-
By unscrewing the coarse filter, you can remove the filter system. Remove any food remnants
and clean the filters under running water.
WARNING
When cleaning the filters, don‘t knock on them. Otherwise, the filters could be contorted and
the performance ofthe dishwasher could be decreased.
CARING FOR THE DISHWASHER
The control panel can be cleaned by using a lightly dampened cloth.
After cleaning, make sureto dry it thoroughly.
For the exterior, use a good appliance polish wax.
Never use sharp objects, scouring pads or harsh cleaners on any part ofthe dishwasher.
CLEANING THE DOOR
To clean the edge around the door, you should use only a soft warm,
damp cloth. To avoid penetration of water into the door lock
and electrical components, do not use a spray cleaner of any kind.
NOTE
• Never use a spray cleaner to clean the door panel as it may damage the door lock
and electrical components.
• Abrasive agents or some paper towels should not be used because of the risk of scratching
or leaving spots on the stainless steel surface.