Notes
– Never step on the scale before „
0.0
“ is displayed.
– The scale is switched on automatically if you do not step on it within approx.
10 seconds after „
0.0
“ is displayed.
–
We recommend using the scale from about 6 kg of the subject.
Replacing batteries
Open the battery cover on the bottom of the scale. Insert a battery with the right polarity
and close the cover. Use AAA batteries (2 pcs) for this appliance. If you are not using the
appliance for some time, take the batteries out!
Notes
–
Do not combine various types of batteries. Do not even combine used and new
batteries together.
–
Batteries not intended for this purpose must not be charged.
–
Remove the batteries if you will not be using the appliance for a long time.
–
The supply terminals must not be short-circuited.
VI. TROUBLESHOOTING OF POSSIBLE PROBLEMS
If you have problems with weight:
– Check whether the battery is inserted properly.
– Check whether you selected the proper weight unit.
– Check whether the scale is on a flat floor and they do not touch the wall.
– If nothing appears on the scale when you want to switch them on by tapping on them
or if „
Lo
“ appears only, replace the battery.
– If „
Err“
appears on the display, the scale was overloaded.
– If unusual signs are displayed, remove the insert the battery again.
– If signs appear, such as if the display is flashing or if there is a faulty sign, try to move
the scale away from the influence of a source of interference or ensure switching off the
source for the time of using the scale.
VII
. STORING
After using the scale, put it into the horizontal position (not vertically), out of reach
of children and incapacitated people (see par.
I. SAFETY WARNINGS
).
VIII
. MAINTENANCE
Do not use coarse and aggressive cleaning agents (e.g.
sharp objects, scrapers, diluting
agents or other solvents
). Clean the board by wiping with a soft wet cloth. Make sure that
water does not get inside the appliance.
13
GB
/ 26
