EN - 57
EN
F
F
I
A
480
mm
B
500
mm
C
840
mm
D
min=50 mm
E
min=50 mm
F
min=50 mm
G
820
mm
H
1030
mm
I
135
°
Leveling the unit
•
To do this adjust the two leveling feet at front of the unit.
•
If the unit is not level, the doors and magnetic seal alignments will not be covered properly
Positioning
Install this appliance at a location where the ambient temperature corresponds to the climate
class indicated on the rating plate of the appliance. For refrigerating appliances with climate class:
- extended temperate: ‘this refrigerating appliance is intended to be used at ambient
temperatures ranging from 10 °C to 32 °C (SN)
- temperate: ‘this refrigerating appliance is intended to be used at ambient
temperatures ranging from 16 °C to 32 °C (N)
- subtropical: ‘this refrigerating appliance is intended to be used at ambient
temperatures ranging from 16 °C to 38 °C (ST)
- tropical: ‘this refrigerating appliance is intended to be used at ambient
temperatures ranging from 16 °C to 43 °C (T)
This appliance is not intended for use at altitudes exceeding 2000 m.
This device is designed for climate class N or ambient temperatures of 16 - 32° C.
Location
The appliance should be installed well away from sources of heat such as radiators,
boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the
cabinet. To ensure best performance, if the appliance is positioned below an overhanging
wall unit, the minimum distance between the top of the cabi-net and the wall unit must be at
least 50 mm. Ideally, however, the appliance should not be positioned below overhanging
wall units. Accurate leveling is ensured by one or more adjust-able feet at the base of the
cabinet. This refrigerating appliance is not intended to be used as a built-in appliance.
+
-
+
+
-
