eta 136890000, Instructions For Use Manual

Page: 48 / 52

GB - 48
GB
VI. TROUBLESHOOTING
CAUTION!
Before troubleshooting, disconnect the power supply. Only a qualified electrician
of competent person must do the troubleshooting that is not in this manual.
!
IMPORTANT!
There are some sounds during normal use (compressor, refrigerant circulation).
These sounds are not a reason for complaint!
!
Warning
type
Problem Possible cause Solution
-
Appliance
dose not work
Mains plug is not plugged in or is
loose, or product is turn off.
Insert mains plug and turn on
the appliance.
Fuse has blown or is defective
(circuit breaker is OFF).
Check fuse, replace if necessary
(switch ON the circuit breaker).
Socket is defective.
Mains malfunctions are to be
corrected by an electrician.
Sr
Failure
warnings
Appears when one or more of the
freezer parts fail or there is
a problem in the cooling system.
Call service immediately.
LF
Freezer
compartment
is not cold
enough
This warning appears if there has
been a power failure for a long
period and when the freezer is
operated for the first time.
1) If your frozen food is thawed,
consume them as soon as
possible and do not freeze them
again since there is a risk of
putrefaction.
2) Temporarily increase the
freezer temperature setting to
the desired level or switch the
appliance to fast freezing mode.
LP Low voltage
Freezer switches to the standby
mode when the voltage supply
falls below 170 Volts.
This feature prevents the
compressor from getting
damaged due to low voltage.
Refrigerator will start operating
automatically when the voltage
restores to the required level.
Temperature Warning:
The temperature display flashes “LF” and an audible warning sounds, when the temperature in
the freezer compartment is too warm.
A rise in the temperature may be caused by:
• Frequent door opening for long periods of time
• Loading with large quantities of warm foods
• High ambient temperature
• An error with the appliances.