II. PREPARATION FOR USE
Remove all the packing material and take the scales out. Remove all possible adhesion
foils, stick-on labels or paper from the scales. Open the battery cover on the bottom of the
scales, insert the battery with the correct polarity (+ pole upwards) and close the cover
in the opposite direction. Then put the scales of firm and flat surface (see par.
I SAFETY
WARNINGS
).
III. INSTRUCTIONS FOR USE
Your scales are fine electronic equipment. One of the things that are most difficult to weigh
is human body as it is always in motion. If you want to obtain reliable results, always try
to step with your feet at the same place on the scales and stand still. If possible, weigh
yourself at the same time of a day (preferably in the morning) to obtain comparable results.
Remember that excessive clothes can increase your weight as well as eating and drinking
before weighing. Short-term weight fluctuation is generally attributed to loss of liquids.
Weighing
Turn on the scale by tapping your foot on the glass plate of the scale and wait until the
display shows 0.0. kg.
Step on the scale and stand still. The weighed reading will flash and it will stay on the
display for approx. 6 seconds. Then the scale will turn off automatically.
Notes
- Do not step on the scale until the display shows
0.0
kg.
- The scale turns off automatically if you do not step on it within 6 seconds from the display
of
0.0
kg.
IV. TROUBLESHOOTING OF POSSIBLE PROBLEMS
If you have problems with weight:
- Check whether the battery is inserted properly.
- Check whether the scales are on a flat floor and they do not touch the wall.
- If nothing appears on the scales when you want to switch them on by tapping on them or
if „
Lo
“ appears only, replace the battery.
- If „
Err
“ appears on the display, the scales were overloaded.
- I f unusual signs are displayed, remove the insert the battery again.
V. STORING
After using the scales, put them into the horizontal position (not vertically), out of reach of
children and incapacitated people (see par.
I. SAFETY WARNINGS
).
VI. MAINTENANCE
Do not use coarse and aggressive cleaning agents (e.g.
sharp objects, scrapers,
diluting agents or other solvents
). To clean the scales board, use the cleaning agents
mentioned in the instructions for use that are intended for glass surfaces and clean
the board by wiping with a soft wet cloth. Make sure that water does not get inside the
appliance.
11
GB
