eta 0311, Instructions For Use Manual

Page: 17 / 32

17
GB
Hair drying
Move the switch A1 either to position 1 (warm air) or to position 2 (hot air). The built-in
ionizer starts to produce negative ions that eliminate creation of static electricity and help to
keep your hair in excellent condition. Direct the outgoing air to hair while keeping the dryer
handle in the distance of 10 to 15 cm from the head and move it evenly. In drying with hot
air flow, take out excessive humidity from hair using a brush or fingers. If you have long
hair, bend your head so that the hair falls down freely from the scalp and face.
IV. MAINTENANCE
Turn off the appliance before each maintenance, unplug the power cord from the power
supply and let it cool down! Wipe the dryer surface with a wet soft cloth. Do not use rough
and aggressive detergents! Maintenance only includes mechanical cleaning. Store the
cooled down appliance at a safe and dry place, out of reach of children and incapacitated
people.
Cleaning the grid (A4)
Grasp the grid and pull it out from the drier. Clean the grid from any dirt (e.g. with a brush).
Replace the grid in an opposite direction after cleaning and click it back.
V. ENVIRONMENTAL PROTECTION
Printed signs of materials used for manufacture, packing, components and accessories,
as well as their recycling, are on all the pieces if their dimensions enable it. The symbols
on the product or in the accompanying documentation mean that the used electric
or electronic products must not be disposed together with municipal wastes. Please,
hand them over to the collection points designed for their correct disposal, where they
will be accepted free of charge. By correct disposal of this product you can help to
preserve valuable natural resources and help to prevent possible negative impacts to the
environment and to human health, which could be the results of incorrect waste disposal.
For further details ask the municipal authorities or the nearest collecting point. Penalties
can be charged for incorrect disposal of such wastes, according to national regulations. If
the appliance is to be put out of operation definitely, we recommend cutting off the feeder
cable, to disable its use.
Expert service must do the large maintenance or to intervene into inside parts of the
appliance!
Non-observance of the instructions of the manufacturer cancels the right for
guarantee repair!
VI. TECHNICAL DATA
Voltage (V) given on type label
Absorbed power (W) given on type label
Weight (kg) approximately 0,35