Eta COMPUTE SPCO0, Installation Manual

Page: 4 / 16

Case 2 (side)
In the case where a door swings into the primary space (inward opening
door), Talia must be mounted on the side opposite the door’s hinges, to
minimize interference in sensing by the door. Side placement can also be
used for doorways which reach the ceiling or any other situation making
center placement not possible.
Optimal and allowed mounting position of the Talia device above the
door. Lens should always point towards the doorway center point
Note that correct Talia placement ensures good performance in the case
where people enter through the door and then taking a hard left or right
turn (so their path ends up parallel to the one of the walls adjacent to
the doorway). This is a realistic scenario for conference rooms where a
conference room table and chairs may immediately block progress after
a person enters the room.