15
GENERAL MAINTENANCE:
10
The following should be conducted MONTHLY
10.1
Safety reverse test. Repeat the test (see F control card features) and make adjustments if necessary.
10.2
Door manual operation test. Manually open and close the door. Check to ensure door is not too heavy or over
tensioned, difficult to close (should be less than 15kg operating force in general), unbalanced or binding due to
loss of tension in the spring.
10.3
Check door is not pulling or pushing askew in the guide tracks thus binding.
10.4
Keep guide tracks clean, dry and clear.
10.5
Check open and closed limits. Check and make sure door is fully opened and closed at desired open / closed
positions.
10.6
Test battery reserve by operating the door with no mains power. (Approximately 5 full cycles)
10.7
Call for professional garage door service if necessary.
11
We recommend the following service to be carried out ONCE A YEAR:
11.1
Professional services to the door and re-adjustment of the door spring tension to make sure the door is in good
working condition.
CAUTION
: Do not lubricate the opener. Do not lubricate the door tracks.
HOW TO REPLACE THE COURTESY LIGHT BULB.
Use non inductive (tungsten filament) 40watt type only
NB! Switch 220Vac mains power off whenever opening either cover!
Remove light cover/lens by removing the fastening screw.
Turn fused bulb out of its fitting.
(Beware the bulb may still be hot if just fused)
Insert and screw new bulb into fitting. Ensure the bulb is firmly tightened but not over tightened in socket.
Replace cover/lens
NB! Remember to switch 220Vac mains power back on, once the cover has been replaced, to prevent unwanted
battery discharge.