4 • START-UP AND SETTINGS
After the device has been successfully installed and the power supply switched on,
the device will automatically perform a test (lasting approx. 30 seconds). The connected
system will switch on to indicate this. After the automatic test has been performed,
the device will be operational.
The time, light intensity values and operating mode settings can be found under the
removable cover
(fig. 5)
.
1.
Turn the operating mode switch
(fig. 5.2)
to Test.
During the test mode, the focus LED remains permanently on. Regardless of the ambient
brightness, if motion is detected, the detector will switch the system ON for one second
and OFF for 2 seconds. Adjust the motion detector to the surrounding area by moving the
sensor horizontally or vertically
(fig. 6)
or by using the enclosed cover clips
(fig. 7)
.
2.
Once you have established the field of detection, turn the operating mode switch to Auto
and set the ON period
(fig. 5.1)
(4 seconds - 10 minutes) and light intensity value
(fig. 5.3)
(2 - 1000 Lux) according to your requirements.
3.
Replace the setting element cover
(fig. 5)
.
5 • PRACTICAL INFORMATION
• Small animals or nearby trees or bushes moving in the wind may cause the motion detector
to switch on.
• The detector‘s range can be dramatically reduced by objects moving towards it,
rather than parallel to it.
TECHNICAL DATA
Mains voltage
230 V ~ 50 - Hz
Field of detection
120° or 200°, horizontally adju/-90°
Range
approx. 12 m at an installation height of 2.50 m
Range adjustment
mechanically by tilting the sensor, max 80°
Switching capacity
230 V ~ 50 - Hz / 230 V AC 50 - Hz, 1000 W/4,5 A (cos
ϕ
= 1),
500 VA/2,25 A (cos
ϕ
= 0,5)
Time setting
approx. 4 sec. - 10 min.
Approx. light value
2 - 1000 lux
Protection type,
Protection class
IP 44, II
Test symbol
TÜV/SÜD
Operating temperature range
-25 °C ... +55 °C
Housing
UV stabilised polycarbonate
Colours
white, black, brown
Measurements
width: 74 mm, height: 80,5 mm, depth: 101,5 mm
Technical and design features may be subject to change.
ESYLUX GmbH
Postfach 1834, 22908 Ahrensburg/Germany
Internet: www.esylux.com
e-mail: [email protected]
SAM 01/2010
