GB
OPERATING INSTRUCTIONS
PD-C360i/8 KNX UP
(EP10427404)
www.esylux.com 9/13
DESCRIPTION OF APPLICATIONS
10. LIGHT CHANNEL FUNCTION
10.1 Switching
Threshold 0 = disabled, motion detection only
Threshold 1 – 2,000 lux (using the up/down menu) or directly enter a value
between 0 and 2,000 lux
Default setting: 500 lux
There is an option of determining an offset (can also be assigned using
objects 14 and 15) between “switching threshold ON/OFF 1” and “switching
threshold ON/OFF 2”
-50% to +50%
Default setting: ±0%
Output telegrams can be sent in binary form (objects 8 and 9), as dim values
(objects 12 and 13), (0-100%), or as scenes (objects 3/4 and 5/6), (1-64).
Individual parameters can be set for the switch ON and OFF values.
10.2 Controlling
• Dim value when controlling begins
Options: 0 - 100% (using the up/down menu) or direct entry 0 - 100%
Default setting: 60%
Control timing: Options: 0.5 - 10 seconds (up/down menu)
If the snooze function is enabled and presence is detected, the detector sends
a value specified in the parameters instead of controlling/regulating the light.
Note: If the control loop exhibits a hunting tendency, the sensor can be adjusted to
various illuminants and ballasts using the “control timing” parameter.
As a rule of thumb: the slower the lighting responds, the longer the control timing
(0.5-10 seconds).
