The <Functions> remote control menu
Doc. no. BA012497_02
43 / 107
GB
7.3 Call scene
The menu item <Call scene> activates one of the four light scenes. You can
configure each scene according to your preferences.
A light scene consists of up to four lighting channels and two DALI switch
devices. The DALI switch devices are connected to a DALI cable to control
a non-DALI-compatible lighting channel. The scenes have default factory
settings, as described in the following table.
You can customise the light scenes for each lighting channel. See
Chapter “Scene editor” page
62 for more information.
Sc1
Sc2
Sc3
Sc4
CH1 %
10
100
30
70
CH2 %
10
100
30
70
CH3 %
10
100
30
70
CH4 %
10
100
30
70
DS 1
Off
On
Off
On
DS 2
Off
On
Off
On
Table 3 Default scene settings
A light scene can also be activated by an external button, see
Chapter 14.2 .
Calling up a scene:
1.
Select the <Functions> menu item and confirm the selection with the
button.
2. Select the
button to choose the menu item <Call scene> and
confirm the selection with the
button.
The sub-menu shows an overview with the four scenes <Scene 1>,
<Scene 2>, <Scene 3> and <Scene 4>.
3. Select the
button to choose the menu item <Scene 2>, for exam-
ple, and confirm the selection with the
button.
The selected scene is activated.
7.4 Store scene
You can customise the light scenes for each lighting channel. To do so,
change the luminous efficiency of one or more channels as described in
Call scene
Scene 1
Scene 2
Scene 3
Scene 4
Bat ok LS
ELC
Store scene
Scene 1
Scene 2
Scene 3
Scene4
Bat ok LS
ELC