Settings via DALI button
Doc. no. BA012497_02
101 / 107
GB
The adjustment process starts, for example by increasing the
brightness.
Briefly release the S1 button and then press and hold it again.
The adjustment process switches direction, for example, the
brightness is reduced.
14.2
Button S2: Call up profiles
Tapping the S2 button retrieves the four stored light scenes. The scene that
is activated depends on how often you press the button within ten seconds:
The number of times you press the button corresponds to the scene num-
ber.
If you press the S2 button more than four times within 10 sec-
onds, the scene count starts again. In other words, pressing the
button once or five times within 10 seconds activates scene 1.
After 10 seconds, previous button presses are reset, and the count
starts again.
15 Settings via DALI button
All Light Control Boxes can be controlled via external DALI buttons. The
DALI button is an external module that sends standard 16-bit commands
(IEC 62386-102:2009). It is connected to the DALI CO connection.
The following commands can be configured and executed via long or short
pressing of the button:
• Lighting channel on/off
• Lighting channel dimming up/down
A DALI button module for scenes can also call up scenes.
15.1 List of DALI commands
DALI commands (16 bits) Address
Description
UP
Broadcast
All lighting channels adjust the
brightness upwards. No command
to DALI switches.
UP
Group 0
Channel 1 adjusts the brightness
upwards. No command to other
lighting channels or DALI switch-
es.
UP
Group 1
Channel 2 adjusts the brightness
upwards. No command to other
lighting channels or DALI switch-
es.