ESYLUX COMPACT APC10 DALI-2, User Manual

Page: 93 / 106

MA
01
994
30
0
EN
Products section
93 / 106
NOTE: For the <Change over groups> function,
all three
button functions
([Short button press], [Long button press] and [Double button press])
must be set to [No function]. For details see
7.11 Change over groups .
7.12.5 Switch
Description
– The push-button inputs can also be used as external switch inputs
for the <Change over groups> function. For details see 7.11 Change
over groups .
– NOTE: For the push button input used, all three push button func-
tions ([Short button press], [Long button press] and [Double button
press]) must be set to [No function]. For details see
7.12.4 Push-
button .
– A switch in the logical sense is any electrical switch contact of a
physical switch insert.
– Up to four switches can be connected to the pushbutton inputs S1-
S4 of the APC with one pole.
Long press of the button Dim UP/DOWN Dim UP/DOWN When the button is pressed for the first time: Dim the light up to
the maximum value; when the button is pressed again: Dim the
light down to the minimum value.
Dim UP Dim the light up to the maximum value.
Dim DOWN Dim the light down to the minimum value.
ON/OFF (see above)
ON (see above)
OFF (see above)
During the period
ON (see above)
During the period
OFF (see above)
Next scene (see above)
Stop (see above)
Automatic mode (see above)
No function –
Double press of the button Automatic mode Automatic mode (see above)
Next scene (see above)
No function –
Command Default value Setting values Function