ESYLUX COMPACT APC10 DALI-2, User Manual

Page: 79 / 106

MA
01
994
30
0
EN
Products section
79 / 106
7.11 Change over groups
Description
– With the <Change over groups> function, areas can be used in flexi-
bly combinable groups. The lights of an area are assigned to several
groups at the same time.
– This allows changing the use of certain areas, depending on the spe-
cific application situation.
– An external light switch or the contact switch of a partition wall trig-
gers the group switch. For details see 7.12.5 Switch .
Requirements
– An external light switch or the contact switch of a partition wall is
connected to one of the push-button inputs S1-S4.
– The button instance for this button input is deactivated, i.e. all three
button functions ([Short button press], [Long button press] and
[Double button press]) are set to [No function]. For details see
7.12.4 Push-button .
– The switch instance for this button input is set to [Change over
groups ON] or [Change over groups OFF].
App
You can get to the <Change over groups> function from the <Products>
menu.
Create group switch:
• Use the button to add a new configuration.