18
ENGLISH
ELECTRICAL INTERCONNECTION
+12V
Connect the 12 volt terminals of the amplifier to the positive poles of the power capacitors by using
suitable cables. Then connect the positive poles of the power capacitors to the 12 volt positive pole
of the additional battery.
ATTENTION:
Use for both connections sufficiently dimensioned cables of at least Ø 50 mm
2
with
a total length of max. 1.5 meters. If you use longer cables, the cross-section must be correspond-
ingly larger. Use very short cable lengths from the amplifier to the power capacitors, which should be
mounted close as possible to the amplifier.
1
BEFORE CONNECTING
For the professional installation of a sound system, car audio retail stores offers appropriate wiring kits. Ensure
a sufficient profile section and a suitable fuse rating and the conductivity of the cables when you purchase
your wiring kit. Clean and remove rust-streaked and oxidized areas on the contact points of the battery and the
ground connection. Make sure that all screws are fixed tight after the installation, because loose connections
cause malfunctions, insufficient power supply or interferences.
Not included in the scope of delivery
INPUT
SENS.
HIGH VOLTAGE
1.0 - 9.0 V
LOW VOLTAGE
0.4 - 3.6 V
< 30 cm >
Turn-on cable to the head
unit (car radio)
ADDITIONAL
BATTERY
< 15 cm >
< 15 cm >
1 2 3
6
6
5
4
4
< 30 cm >
Min. Ø 50 mm
2
with a
max. total length of 1.5 m
Min. Ø 50 mm
2
with a
max. total length of 1.5 m
Min. Ø 50 mm
2
with a
max. total length of 1.5 m
Min. Ø 50 mm
2
with a
max. total length of 1.5 m
Summary of Contents for Vision VX 13000 PRO
Page 1: ...BENUTZERHANDBUCH OWNER S MANUAL VX13000 PRO ULTRA CLASS D MONO AMPLIFIER VERS 1 0 ...
Page 26: ...26 ...
Page 27: ...27 ...
