11
ELECTRICAL INTERCONNECTION
INSTALLATION INSTRUCTIONS
2
F
1
BEFORE CONNECTING
Clean and remove rust-streaked and oxidized areas on the contact points of the battery and the ground connection. Make sure that all
screws are fixed tight after the installation, because loose connections cause malfunctions, insufficient power supply or interferences.
RED
BLACK
GROUND
Connect the black cable of the wiring harness plug with a suitable contact ground point on the vehicle’s chassis. The ground wire
must be as short as possible and must be connected to a blank metallic point at the vehicle’s chassis. Ensure that this ground
point has a stable and safe electric connection to the negative “–”pole of the battery.
FUSE
The inserted fuse (10 A) protects the sound system from shorts and capacity overload. If you need to replace the defective fuse,
use a fuse with the same fuse value.
BATTERY
Connect the red cable of the wiring harness plug with the +12V pole of the vehicle’s battery
R +
R -
L +
L -
BATT+
GND
REM IN
REM OUT
F
1
2
4
3
2
1
8
7
6
5
WARNING:
Use only the included cable
adapters to connect the device.
