www.esu.eu
LokPilot Standard
ESU P/N 02714-14649
P
Reliable, Dual Mode DCC / DC decoder with B-EMF function
P
Four powered function outputs (+2 logic level outputs for 21MTC version)
P
RailComPlus® for automatic Registration at ESU ECoS command station
P
For all engines equipped with DC- or coreless motors
ESU LLC
477 Knopp Drive
Muncy Pennsylvania 17756
USA
ESU GmbH & Co. KG
Edisonallee 29
D - 89231 Neu-Ulm
GERMANY
53611
LokPilot Standard
Digital Decoder
NMRA 8 pin wire harness
DCC & RailComPlus
4AOEGOP*
MADE IN CHINA
Specification
Operational
modes
NMRA/DCC with 14, 28, 128 speed steps.
2-digit (short) and 4-digit (long) addresses.
Analog DC operation (de-selectable).
Automatic recognition of operational mode and DCC speed step selection.
Supports Lenz® LG 100 braking sections.
Throttle
Runs DC and coreless motors.
0,9 A continuous load. Silent, safe 20,00 kHz pulse width frequency motor regulation.
Motor output overload protection; Back EMF (de-selectable).
Function outputs
4 powered outputs with overload protection.
250mA load per output.
500mA total load of all function outputs.
21MTC connector version has two additional logic outputs.
Shunting speed and momentum key selectable.
Programming
DCC Servicemode & DCC POM (Programming on Main).
Features
RailCom® Feedback system. RailComPlus® automatic Registration.
Interface
NEM652 ( 8 pin )
21MTC
PluX 12
dimensions in mm
dimensions
25,5 x 15,5 x 4,5
1.00 x 0.61 x 0.18
25,5 x 15,5 x 4,5
1.00 x 0.61 x 0.18
14,5 x 8,3 x 2,4
0.57 x 0.33 x 0.09
Item - Number
53611
53614
53616
This product is not a toy. Not recommended for children under 14 years of age.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth
defects or
other reproductive harm.
