background image

Take the bike out of the carton 

and carefully remove all foam 

protective sheets, cable ties and 

cardboard.

Screw the fender (mudguard) in at the top of the 

crown fork.

Tip: Make sure that the fender isn’t rubbing against 

the wheel, if it is, the fender may be screwed in too 

tightly, loosen slightly and check again.

Tip: Use scissors to ensure you 

don’t damage the bike.

Ensure the fork is front facing. Position

the front wheel in the fork, then tighten 

the axle nuts by hand. Check that the 

wheel is equally spaced between the 

fork tubes, then tighten with a wrench.

Tip: Ensure the wheel 

is positioned correctly 

so that the fender 

(mudguard) is facing 

the rear of the bike.

Get Everything Out

The breaks have already been adjusted, however, if 

they require some tweaking, please follow the 

instruction manual.

Hit The Breaks

Get It Together

Screw It

Quick

Electric Bicycle (Unisex)

Model: ESTC27U

START GUIDE

1

2

3

Fender

Reviews: