background image

 

12

 

ALWAYS  turn  the  heater  OFF  and  unplug  the  power  cord  from  the  outlet  before 
cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in 
electric shock, fire, or personal injury. 

Electrical and Moving Parts: 

  The fan motors are lubricated at the factory and will not require lubrication. 
  Electrical components are integrated in the fireplace and are not serviceable by the consumer. 

Storage: 

  Store heater in a clean dry place when not in use. 

 

 

WARNING! NO SERVICING of the internal or electrical parts should be performed by the 
consumer. Do not service the unit yourself. 

 

Limited Warranty 

This warrants to the original purchaser that this product is free from defects in material and workmanship as of the date of purchase and 
that it will, under normal use and proper care, remain so for one year from the date of purchase. Missing or initially defective parts will 
be replaced free of charge during the period of this limited warranty. If parts are unavailable, comparable replacement or refund will be 
given.  The  original  dated  sales  receipt  is  required  for  all  warranty  claims.  This  warranty  does  not  cover  damage  which  has 
occurred during transport from the point of purchase to the consumer’s home. This warranty does not cover glass, light bulbs, batteries, 
transportation, labor, or other issues not associated with the manufacture of the product.   

This  product  is  for  residential  use  only.    Any  and  all  commercial  use  of  this  product  voids  all  warranties,  and  frees  the 
manufacturer from all liability.
 Read and understand all assembly and operating instructions, and all safety information and warnings, 
before use. The following will void this warranty: Damage caused from tampering with, modifying, or altering the fireplace insert in any 
manner; Damage due to incorrect assembly, improper care, misuse, or abuse; Damage from being used with the wrong power source; 
Water  damage;  Damage  caused  from  this  insert  being  used  outdoors;  Damage  caused  from  this  insert  being  used  for  excessive 
periods  of  time;  Damage  caused  by  the  insert  being  used  in  a  commercial  application;  Damage  from  use  as  a  primary  heat  source; 
Other misuse or abuse not specifically listed herein.  

This  product  is  not  intended  to  be  used  as  a  primary  heat  source.  It  is  for  supplemental  heating  purposes  only.  Vendor 
Development Group, Inc.(hereafter, VDG), its directors, officers, or agents, will not be liable to the purchaser or any third party, whether 
in contract, in tort, or on any other basis, for any indirect, special, punitive, exemplary, consequential, or incidental loss, cost, or damage 
arising out of or in connection with the sale, maintenance, use, or inability to use this product, even if VDG, or its directors, officers, or 
agents have been advised of the possibility of such losses, costs or damages, or if such losses, costs, or damages are foreseeable. In 
no event will VDG, or its officers, directors, or agents be liable for any direct losses, costs, or damages that exceed the purchase price 
of the product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or 
exclusion  may  not  apply  to  the  purchaser.  This  limited  warranty  gives  you  specific  legal  rights,  and  you  may  also  have  other  rights 
which vary from state to state. 

 

 

 

 

 Thank you for purchasing this product!  If you have questions about assembly, or about the safe 

operation of this product, please e-mail us at:  

[email protected] 

Or, call us toll-free (M-F 8:30 AM to 4:30 PM Central Standard Time) at:  

1-866-561-0731  

VDG, Inc. 

Minneapolis, MN 55401 

Made in China 

 

 
 

Summary of Contents for EFW-XB34B













Reviews: