7
This next step involves
GLASS!
ALWAYS
use
extreme caution
when handling
glass.
Failure to do so could result in
personal injury
or
property damage
.
ALWAYS keep the decorative glass OUT OF REACH OF CHILDREN!
Leave
no glass
pieces where children can find them
. Failure to do so could cause a
choking hazard
.
NOTE: We recommend that two capable adult perform this procedure.
STEP 9A.
With you or someone holding the glass panel, remove the two screws at the top edge of
the fireplace with a Phillips (+) screwdriver.
STEP 9B.
Together, carefully remove the front glass panel and set it aside on a clean soft surface.
STEP 9C.
Arrange the decorative glass (F) on the shelf in the desired position.
STEP 9D
. Align the glass panel tabs with the holes on the top edge of the fireplace. Set the glass in
place. Thread the screws back into the holes and tighten them both with a Phillips screwdriver.
Operation
Read and understand
this entire owner’s manual, including
all safety information
,
before
plugging in
or
using
this product. Failure to do so could result in
electric shock,
fire, serious injury, or death.
Power
r
Make sure the ON/OFF switch, located on the left side panel, is in the OFF position. Plug the power cord into a
110~120 Volt 15 Amp grounded outlet (see
IMPORTANT SAFETY INFORMATION
on
Pages 2 and 3
). Make
sure the outlet is in good condition and that the plug is not loose.
NEVER
exceed the maximum amperage for
the circuit.
DO NOT
plug other appliances into the same circuit.
Methods of Operation
This electric fireplace can be operated by the CONTROL PANEL, located on the right side panel of
the fireplace (see figure below), or by the battery-powered REMOTE CONTROL.
Before operating, please review the
IMPORTANT SAFETY INFORMATION
on
Pages 2 and 3,
and
heed all warnings.
Control Panel Operation
F
F