7
OPERATION
TEMPERATURE LIMITING CONTROL
This heater is equipped with a Temperature Limiting Control.
Should the heater reach an unsafe temperature, the heater will automatically turn
OFF.
TO RESET:
1. Turn the
ON/OFF
switch on the
CONTROL PANEL
to
OFF.
2. Unplug the power cord from the outlet.
3.
Wait 5 minutes.
4. Inspect the fireplace to make sure no vents are blocked, or clogged with dust or lint. If they are,
use a vacuum to clean the vent areas.
5. With the
POWER
switch
OFF,
plug the power cord back into the outlet. If the problem continues,
have your outlet and wiring inspected by a certified technician.
CLEANING
Metal:
Dust using a soft cloth, slightly dampened with a citrus oil-based product.
DO NOT
use brass polish or household cleaners as these will damage the metal.
Glass:
Spray glass cleaner onto soft cloth (NOT directly on to glass).
Dry thoroughly with a paper towel or lint-free cloth.
Plastic:
Wipe with a slightly damp cloth and a mild solution of dish soap and warm water.
Vents:
Use a vacuum or duster to remove dust and dirt from the heater and vent areas as needed.
CARE AND MAINTENANCE
NEVER immerse in water
or
spray with water
or
other liquids (ex: cleaning solutions).
Doing so could result in
electric shock, fire,
or
personal injury.
h
Storage:
Store heater in a clean dry place when not in use.
Electrical and Moving Parts:
The fan and motors are lubricated at the factory and will not require lubrication for the life of the prod-
uct. All electrical parts and components, except for the light bulb(s) are integrated into the heater and
are not serviceable by the consumer.
Risk of electric shock! DO NOT OPEN the main panels! No user-serviceable
parts inside!
h