Estarli
e20 Operating & Maintenance Instructions
For safe use, regularly check the condition of the brakes and rims.
Cleaning
In order to avoid corrosion of the bicycle, it is necessary to rinse your bicycle with fresh
water after each use and / or if it has been exposed to sea air. The cleaning must be done
with a sponge, a basin of warm soapy water and a water jet (without pressure). Be
especially careful not to use a pressurised water jet.
Lubrication
Lubrication is essential on the various components which are in movement in order to
avoid corrosion, it must be carried out regularly on the ball bearings located in the axis of
the wheels, chain, derailleur and cables of control. It is advisable to use specific oil for the
chain and the derailleur. You must use grease for the other components
4 Warranty
Your new delicious estarli eBike comes with a 2 year warranty. The warranty
covers parts and labour (if returned to one of our depots). Should you opt to have
your eBike worked on by an independent qualified bike repairer we will happily
send you replacement parts subject to the terms of our warranty and with prior
authorisation from us.
●
Any component replaced under these warranty terms will be covered for
the remaining warranty period of the eBike.
●
Any components replaced under warranty must be returned to Estarli Ev
Limited and will become property of Estarli Ev Limited.
●
We may from time to time at our discretion make repairs to defective parts
falling outside of the warranty period. Such work shall not be deemed an
admission of liability.
Exclusions
Contractual warranty excludes damage or defects caused by: abnormal use, lack
