Established & Sons SURFACE TABLE Quick Start Manual Download

Page: 5 / 6

Insert part C into the end of part F and tighten by turning in a clockwise direction

using a 6mm allen key. Insert Part D into the top to finish. Repeat steps 1 - 4 for the

remaining 3 legs.
Carefully lift the assembled table and turn the right way up. Gently lower to the floor.

Fit part E over the parts already in place. Tighten by turning in a clockwise direction using

a 12mm spanner.
Slide part F over part E

Summary of Contents for SURFACE TABLE

Page 1: ...erence Woodgate John Bernard ESTABLISHED SONS United Kingdom Phone 44 0 20 7608 0990 establishedandsons com ESTANDSONS LTD Estandsons Warehouse Intereuropa d d Mednarodni prehod 8 SI 5290 Šempeter pri Gorici Slovenija ...

Page 4: ...n blanket is laid on the floor to prevent damage to the surface of the table top Carefully uncrate and place in the prepared area with the bottom of the table facing up Screw part A in a clockwise direction into the corner fitting Slide part B over part A in the orientation shown ...

Page 5: ...en key Insert Part D into the top to finish Repeat steps 1 4 for the remaining 3 legs Carefully lift the assembled table and turn the right way up Gently lower to the floor Fit part E over the parts already in place Tighten by turning in a clockwise direction using a 12mm spanner Slide part F over part E ...