17
10.1 Transmitter's code setting
10. Transmitter (Remote control) setting
Press "LEARN butTON", the "LEARN LED" light on, then, press and hold the button which you choose
on the transmitter till the "LEARN LED" flashes and goes out, now, the transmitter is coded. Other
transmitters can be coded as this way.
10.2 Erasing the transmitter's code
Press" LEARN BUTTON" and hold on to make the "LEARN LED" light on and till go out. Now, all codes
of transmitters which had been learnt are cleared.
11. Error Codes
Remove the Object that Blocks the Photo Beam
Remove the Object that Block the Air Wave
Optical Counter Limits
Code
Err1
Err2
Err3
Err7
Err8
Meaning
Solution
Check the Optical Counter Limits wires
Motor Nonstop Running Over Limits
Motor Locked Rotor
Photocell is Triggered
Air Wave Sensor Triggered
1.Check the Optical Counter Limits Connecting
2.Check the Mechanical System
1.Check the Mechanical System
2.Check Motor Wires Connectors
