Essilor Instruments Vision-C 600 User Manual Download Page 6

Waste disposal symbol in accordance with Directives 2012/19/EU and 2011/65/EU

I

ON = Turned-on (power supply connected to the mains)

O

OFF = Turned-off (power supply disconnected to the mains)
Polarity

On the packaging

Handle with care

This way up

Maximum stacking of 1 product above market product

Fragile

Keep dry

CE Marking (European regulation relating to medical devices)

Indicate the thermal limits to which the medical device can be exposed in complete safety

Indicate the humidity limits to which the medical device can be exposed in complete safety

Indicate the limits of atmospheric pressure to which the medical device can be exposed in

complete safety

4. Copyright

Copyright © 2021 Essilor - Original manual All rights reserved.
All reproduction of the content of this document, whether in part or as a whole, for the purpose of its publication

or dissemination by any means and in any format whatsoever, even free of charge, is strictly prohibited without

Essilor's prior written consent.

U

SER

 

MANUAL

 > I

NTRODUCTION

Vision-C 600 - Polarized visual chart system > V1- 02-2021 (VRSQSE)

6

Summary of Contents for Vision-C 600




















































Reviews: