Essilor Instruments Mr Blue 2.0 Sun and Sport Edition, User Manual

Page: 9 / 36

You can clamp the lens manually by pressing .
Make sure you move your hand well away before you start the edging cycle.
Check that the Chemistrie lenses TM are still properly in place during the clamping phase. They must
remain clipped together.
Configure edging:
For the clips and , by default, edging is configured as follows:
Material
Finishing wheel
Edging mode
Type of cycle
Polishing
For the clips and , by default, edging is configured as follows:
Material
Finishing wheel
Edging mode
Type of cycle
Polishing
Press to start the cycle.
Re-start the procedure for as many times as you have Chemistrie clips TM to perform.
9
10
Mr Blue 2.0 Sun & Sport Edition > V1.0 04/2018
12
U
SER MANUAL
> I. P
ERFORM A
C
HEMISTRIE
TM
JOB