KE-1603 Code Programming Commands
Code Type
Commands
Master User Code
Where is the
Programming Switch
Installed?
--------------------------
--
What is my Master User
Code?
-----------------------------------
To Change The Master User Code
1. Locate and press the Programming Switch
2. 4 Rapid Beeps
will sound
3. Enter 1119 on the keypad
4. 3 Rapid Beeps
will sound
5. Enter the new 3–8 Digit Master User Code within
5 seconds
6. Wait 5 seconds for 3 Rapid Beeps
7. Test the new Master User Code
8.
If the new code does not work, repeat Steps 1–7
! Caution !
.
Make sure you have door keys or leave a window open before testing your new
Master User Code!
Code Type & Memory
Location
Commands
Optional User Code 111
Optional User Code 113
Optional User Code 115
Optional User Code 117
Optional User Code 119
To Add or Change an Optional User Code
1. Enter the Master User Code on the keypad
2. Enter the Optional User Code Memory Location
Number
3. 3 Rapid Beeps
will sound (command accept)
4. Enter the new 3 – 8 Digit Optional Use Code
5. Wait 5 seconds for 3 Rapid Beeps
(system
reset)
6. Test the new Optional User Code
7. If the new code does not work, repeat Steps 1–8
8.
Repeat Steps 1– 8 to add additional Optional
Users
Optional User Code 111
Optional User Code 113
Optional User Code 115
Optional User Code 117
Optional User Code 119
To Delete an Optional User Code
1. Enter the Master User Code on the keypad
2. Enter the Optional User Code Memory Location
Number
3. Wait 5 seconds for 3 Rapid Beeps
(system
reset)
4. Test the deleted Optional User Code
5.
If the deleted code still works, repeat Steps 1–5
Note:
One Long Beep indicates an error – allow the
system to reset - 2 Rapid Beeps
- then proceed to
re-enter the required commands
