Commissioning
When using the essent
im
scouter for the first time, the following steps must be performed:
1. Set up system
2. Establish connection to the essent
im
Cloud
a
b
c
d
e
f
USB A port (WLAN stick)
LAN port
Reset Button
Power Supply connector
Power LED
2 x antenna connector
Mounting the System
●
Screw the enclosed antennas to the scouter.
●
Position the scouter in a place protected from dust, sunlight and moisture.
Note
Observe the scouter positioning aid in this user manual.
●
Connect the scouter to a 230 V power supply using the enclosed power supply unit.
Warning
Lay all cables so that no person can trip over them. Position the scouter so that
no person can trip over it. Do not use any accessories that show external damage
or strange behavior. Only use accessories approved by essent
im
.
●
If the scouter is properly connected to the mains, the power LED lights up green.
scouter Positioning Guide
When positioning the scouter, some aspects should be taken into account to achieve optimal
network coverage. For large rooms, several scouters are required for the wireless sensor
network. If you have problems with the connection of the scouter, please contact essent
im
support at
10
User Guide scouter - Version 1.2
Summary of Contents for scouter
Page 1: ...User Guide...
