Essentiel 8007765, Instruction Manual

Page: 27 / 71

6.
Select the station of your choice, then press the button.
7.
Now you have to select the alarm frequency: once ( once ), every day of the week ( every
day ), the first five days of the week ( week ) or on weekends ( Weekends ). Press the
button to go to the last step.
8.
Press the or buttons to adjust the ringer volume.
9.
Press the button one last time. “ALARM Stored” appears on the screen, and the
alarm setting is saved.
10.
To set the second alarm, press and hold the button for 3 seconds, then follow steps
1 to 9 described above.
Activate or deactivate the two alarms
By default, a set alarm is not activated.
To activate the alarm, press the button twice or the button.
The or icons appear to the right of the time. The or alarms are activated.
Do the same if you wish to deactivate the alarms.
You can also briefly press the button or the button. Then press the or
buttons to select
“YES”
(
ON
) or
“NO”
(
Off
). Press the button to confirm.
alarme 1
Stoppingthealarm
When the programmed time is reached, the alarm rings and the or icons flash
on the screen. Press one of the buttons on the clock radio once (except the
button) to stop the ringing.
If you selected all days of the week (
Daily ), the first five days of the week ( Weekdays ) or
weekends ( Weekends ), the or icons remain displayed and the alarm remains active
for the next day.
1.
Press on the button several times until you select the auxiliary source.
2.
Connect the 3.5mm audio plug to your audio source, such as an MP3/MP4 player, a
laptop, etc.
3.
Plug the other end of the cord into the AUX auxiliary input jack on the clock radio.
4.
Start playback, and adjust the volume on your audio source.
connectaremovablemedium
1.
Connect your USB key or insert your micro SD card into the ports on the back of the
clock radio.
2.
Press on the button several times until you select the USB source or the SD source.
3.
Playback starts automatically. To increase the volume, press the button.
To decrease the volume, press the button.
4.
Press the or buttons to go to the previous or next track.
5.
Press the button to pause or resume playback.
settingthealarms or
Setting the alarms
1.
After setting the time, press and hold the button for 3 seconds to access the Alarm
1 setting. The hour digits flash on the screen.
2.
Press the or buttons to set the hour digit then press the button to
confirm. The minute digits flash.
3.
Press the or buttons to set the minute digits and then press the button
to confirm.
4.
Now select the duration of the alarm ( 15 , 30 , 45 , 60 , 90 or 120 minutes ), then press the
button to go to the next step.
5.
Press the or buttons to select the playback source ( FM , DAB or Buzzer ). Press
the button to go to the next step.
52
V.1.0
settingthealarms
53
V.1.0
settingthealarms