essentiel b MEDIATEC TNT, Manual, Page: 57 / 154

6
En
7
If you do not use the • MediaTec TNT for a period of time, a
screen saver will start. To exit screen saver mode, press any
button on the remote control.
The following pictogram indicates that the • MediaTec TNT is
loading information.
Television set up
Set-up advice
If you have a flat LCD or plasma screen with an HDMI output, use this first. It
enables you to have a High Definition quality picture.
To get the best quality picture possible, select the most suitable output resolution
on the MediaTec TNT.
To change the output resolution on the MediaTec TNT, go to
Parameters / Connection / HDMI YUV output resolution.
Do test out several output resolution settings as the picture quality can vary
depending on the screen’s performance.
If you have a cathode ray tube screen, use a “composite CVBS” cable (yellow).The
signal will be suited to your screen.