Page 2
2. Open frame by separating the hook & loop strap and pushing down
on the hinged folding mechanism so that the hinged bar is level.
SET UP INSTRUCTIONS
3. Insert the backrest, handles and basket or pouch.
(a)
To insert the backrest, push pins on the outside of the
backrest and insert backrest into the brackets on the front of
the walker frame. Once properly installed, the backrest should
click into place and the pins should protrude into the holes.
(b)
Unscrew height adjustment knobs from handles and insert
handles into the frame of the walker while making sure the
cable are on the outside of the frame.
(c)
Adjust the handle height as directed by your physician,
physical therapist or trained professional. Insert the bolt from
inside of the frame so that the hex head fits snugly into the six
sided hole in the frame.
(d)
On the outside of the frame, place the washer on the bolt and
firmly screw the knob until fully tightened, making sure that the
bolt head is still securely recess in the frame.
(e)
Place the pouch or basket under the seat of the walker.
Pouch and
Basket
Large Height
Adjustment Knobs (2)
with Bolt & Washer
Hinged Folding
Mechanism
Loop Brakes Handles
are attached to the
Frame by Cables (2)
Fold up
Backrest
Backrest
Bracket
Serial No. Label
on back
4. Be sure all attached hardware is tightened securely.
