Slip the Back Rest
Support Tubing into
Back Rest Guides from
the back side of the
seat. Press the gold
locking buttons on the
Back Rest Support
Tubing through the
Back Rest Guides until
the button snaps into
the hole of the guide.
7
•
Note the two locking
buttons on each Back
Rest Support Tubing,
which will allow for
two positions for the
Back Rest.
Flip the bench over
and verify all legs are
touching floor and
the bench is level and
stable.
8
Attach both Arm Rests
into the Frame Tubing
and lock in place
with the gold locking
buttons.
9
FRONT
v
10
Slide Adjustable Leg
over outer frame
tubing. To set desired
height push gold
button on frame while
simultaneously sliding
adjustable leg down
the length of the Frame
Tubing. Once you have
reached your desired
height, the gold button
should fully protrude
through the hole.
Repeat for all four
adjustable legs.
View of fully assembled
B3011 Bath Bench
with Back.
11
• Before using, be
sure that all gold
locking buttons
fully protrude
thru holes of each
Guide and holes
of all Adjustable
Legs and Arm
Rests.
• Make sure all
Adjustable Legs
are snapped in
the same hole
position.
• After first use,
retighten all
M6 Screws
using a Philips
screwdriver.
Warning!
Summary of Contents for B3011
Page 4: ......
