STEP 6
Attach a slat (L) onto the bottom side rails (I and K) of the bottom bunk so that it touches the corner posts (as
close to the headboard as possible) with flat head wood screws (4). Attach the rest of the slats (L) onto the
bottom side rails (I and K) with flat head wood screws (4). Use safety block (V) to space them out evenly.
BUNK BED
DA1026RP2 PINE / DA1026RW2 WHITE/ DA1026RWN WALNUT
NOTE:
If you notice that any of the slats (L) are not perfectly flat, be sure to assemble them so that the slats
(L) curves up in the middle and down on the ends.
Repeat this process for the top bunk.
I
I
H1
A
52 PCS
E
D
4
One per side
V
E
D
K
I
(L): slats:13 pcs for the lower bunk
13 pcs for the upper bunk
9
