Essential Home chest of drawers, User Manual, Page: 3 / 8

14
3
fig 3
Insert dowels into the large holes in
the sides, in the positions shown, (3
dowels in each).
fig 4
Screw a cam pin into the small
hole, as shown, on each side.
Insert cams into the largest holes,
near the top of both side panels.
Notice the arrows ( ) on the cams.
These need to point towards the
nearest edge (the top edge).
fig 5
Insert cams into the large holes
near the ends of the upper rear rail,
(arrows pointing towards the
nearest edge), and attach to the
left hand side, allowing the cam pin
and dowel to enter the correct
holes. Using a screwdriver, tighten
the cam, by giving a turn to
the right.
Attach the plinth, best face
outwards, to the dowel near the
bottom and front edge of the side
panel. Screw a bolt through the
open hole in the side and into the
end of the plinth.
Attach the remaining rail in a similar
manner to the dowel at the rear.
Use a bolt to secure to the side.
fig 6
Turn the assembly, very carefully
onto the side.