8
5
2
3. Assembling the Unit
8. Handles
the Handle Bolts supplied.
panels. Fix the Handles (15) onto the door panels using
shown. Turn the CAMs (8) to tighten the panels together.
6. Hinges and Hinge Adjustment
Locate the panels by inserting the CAM Pins (9) into the respective holes in the positions as
the 12mm C/Sunk Screws (14).
C
B
A
Fix the Hinge Assembly (13) to the Doors (6)using
Drill a 5mm hole through the top two holes in the door
4
Adjustments apply when door is mounted.
3
1
3
A. Adjusts door vertically
B. Adjusts door horizontally
C. Adjust door in and out
7. Mount Doors
Attatch the Hinges (13) to the Hinge Plates (13) on
both of the End Panels (1/2). Do this by locating the
hooks on the front face of the hinge plate and press
down until it clicks into position.
A
172001
