Installing the MGLS
8
Care@Home™ Door/Window Sensor User Guide
4.
Attach the transmitter to the mounting base.
Figure 6: Close Transmitter
5.
Identify the location for mounting the MGLS. Refer to 2.2 Determining the Best Location on page
4.
6.
Clean the surfaces of the mounting locations thoroughly. Make sure the locations are dry.
NOTE:
Refer to Using Screws on page 16 for information about installing the
MGLS using screws.
7.
Peel off the protective strip from the mounting-tape of the transmitter.
8.
Press the transmitter into place.
9.
Position the magnet at the same level as the transmitter, so that the alignment marks are aligned,
as illustrated in the following figure.
