Installation
4
Care@Home™ Emergency Pendant User Guide
2.
Installation
As a portable device, the EP is meant to be carried by the Resident at all times. The EP is designed to be
worn as a pendant or on the wrist of the Resident, depending on the Resident’s preference.
The EP is provided with its battery installed.
Installation includes:
Pairing with the CP
Installing the EP on a carrying option
2.1.
Pairing with the CP
EPs may be added to the Care@Home
™
system by running the pairing process.
To add an EP, perform the following procedure:
1.
Press the
PAIRING
Button on the right-side of the front of the CP for five seconds. The CP beeps
and the ring around the
EMERGENCY
button lights up in
Blue,
with a circular movement effect.
2.
Holding the EP, move about 50 cm (20 in.) away from the CP.
3.
Press the EP button.
The pairing process can have the following results:
If the pairing process is successful, the ring around the
EMERGENCY
button blinks
Blue
three
times and the CP beeps.
If the pairing process is not successful, the CP beeps and the ring around the
EMERGENCY
button lights
Red
for two seconds.
If the peripheral device is already paired, the CP beeps and the ring alternates with a
Blue
and
Red
light.
If no additional peripheral devices can be integrated, such as when the CP memory is full, the
CP beeps and the ring light
Red
.
The CP returns automatically to its previous operation mode following the pairing process.
2.2.
EP as a Pendant
To wear the EP as a pendant, attach the EP to the clip-on base hanging from the supplied lanyard, as
illustrated in Figure 2 below.
