OPERATION
WeR@Home+™ Smoke Alarm User Guide
17
Safety
Security
Reliability
Environment
4.3.
Indications
Table 1 defines the indications represented by the LEDs. The combination of the LED color,
flashing or steady LED display, and sounds emitted by the SK differentiate between the various
situations.
Table 1: LED Indications
Indications
Flashing
LED
Beep repeats every 25 -
35 seconds
Actions/Comments
Normal operation (default state)
Power -
Green
No sound
The battery charge is low. The batteries
need to be replaced.
The low battery indication can last for up
to seven days.
Fault –
Yellow
One beep
Press the
TEST/MUTE
button to temporarily stop
the LED from flashing for the
next 12 hours.
The SK is not being tested regularly
No sound
Smoke detection sensitivity is at least
20% below the sensitivity factory
setting.
One beep
Replace the SK immediately.
A malfunction has occurred.
One beep
Call a technician.
Smoke detection indication
Alarm -
Red
The SK sounds an audible alarm
of 3 beeps, a pause, and then
another 3 beeps.
Push the
TEST/MUTE
button
to suspend the alarm for five
minutes. When suspended,
the SK re-assesses the
smoke level. If the smoke
has not dissipated, the SK
sounds the alarm again.
When the SK is removed from its
bracket, the tamper switch is triggered.
A loud continuous tone
Returns to normal state
when the SK returns to its
bracket.
Alarm event reports are retrieved via the hub.