6
FLUE STABILISER
A flue stabiliser can be fitted to reduce the draught through the stove if the flue draught is too high. The
flue stabiliser should be:
•
Fitted in the same room as the stove
•
The same size as the flue pipe
•
Note if a stabiliser is fitted, ventilation will need to be increased.
DIMENSIONS & CLEARANCES
Fig. 3 Stove Dimensions
Log Stores
The height of the fitted legs on a 100 are 150mm. The log stores available are 220mm and 300mm in height.
Adding an additional 70mm or 150mm in height when fitted. Clearances remain the same. To retrofit the
log store, remove stove innards, unscrew the legs from the base of the existing stove, lift the stove body
on top of the log store and screw into place. Then put the innards back inside vice versa to how you
removed them.
Flue Test Point