CORRECT OPERATION CHECKLIST
Page 18
4. RESETTING AN ALARM
-1
nd
mode: reset by “End” code (factory default)
Press
to end the alarm.
-2
st
mode: automatic reset
Hang up or press
to end the alarm.
Remark: you can choose the 1
st
or the 2
nd
mode with the “Alarm
reset mode” programming (code 77).
In case it should not be possible to stop the alarm procedure remotely (i.e. the
entered telephone number is incorrect) simply lift the handset of the local telephone
and dial * <Password> # (by factory default:
.
How to use the reset pushbuttons
Use of the reset pushbuttons (E in the picture at page 2, G in the picture at page
4, R in the picture at page 5, F in the picture at page 6):
Pressing shortly
Allows to interrupt an alarm call.
By pressing shortly you get the same result as lifting the handset of the local
telephone and entering : * <Password> #.
Pressing longer (15 seconds)
Allows to reset the device.
By pressing longer, the device will be re-started with no need to disconnect
the power supply.
The reset operation does not alert the previously set parameters.
